[Techtoolslist] FS 48 pieces NOS U214D20 static 4K RAM
William Stillwell
ki4swy at gmail.com
Tue Jul 26 17:12:34 EDT 2016
Riptor/Twisty Wrist sells 2114 Ram @ 2.89 Each Qty 1.
I think 150 is a little on the high side.
William Stillwell
Hamster / KI4SWY
Free Play Florida Arcade & Pinball Show Organizer
On Tue, Jul 26, 2016 at 4:57 PM, Art <art at artfromny.com> wrote:
> $150? Free shipping
>
> Thanks
>
> Art
>
> PS - I don't remember if FS is ok here - holler if not and I won't do it
> again
>
> -----Original Message-----
> From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf
> Of Tony Jones
> Sent: Thursday, July 14, 2016 4:41 PM
> To: Technical Tools Mail List
> Subject: Re: [Techtoolslist] 9010 fan question
>
> Seems fully sealed front back to me. I just kindly took up Art on his
> offer. Easy peasy. Appreciate your "i'm trying to not treat you like a
> blithering idiot" :-)
>
> Thanks
>
> Tony
> On Jul 14, 2016 12:55 PM, "Jess Askey" <jess at askey.org> wrote:
>
> >
> > Sometimes the label is on the mounted side of the fan so you have to
> > take it out to see it. Apologies if you already did that... I support
> > technology in my day job (I'm 'working' as I type this) so at least I
> > didn't ask you if your computer was plugged in.
> >
> >
> >
> > -------- Original message --------
> > From: Tony Jones <tony at tonyjones.com>
> > Date: 7/14/16 12:10 PM (GMT-07:00)
> > To: John Robertson <jrr at flippers.com>, Technical Tools Mail List <
> > techtoolslist at flippers.com>
> > Subject: Re: [Techtoolslist] 9010 fan question
> >
> > On Thu, Jul 14, 2016 at 10:43 AM, John Robertson <jrr at flippers.com>
> wrote:
> >
> > > Depending the fan design there may be a removable rubber seal under
> > > the
> > fan
> > > label (if in the middle of the fan). I peel back the label, remove
> > > the
> > seal
> > > and then put a couple of drops of synthetic motor oil (around 20W)
> > > and
> > let
> > > it soak in a while then spin the fan manually back and forth to work
> > > the
> > it
> > > back into the bushings. Then seal it back up.
> >
> > No, not on this fan.
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
More information about the Techtoolslist
mailing list