[Techtoolslist] Fluke 9100A troubleshooting
Ian Eure
ieure at icloud.com
Thu Aug 4 22:50:21 EDT 2016
> On Aug 4, 2016, at 3:14 AM, Andrew Finn via Techtoolslist <techtoolslist at flippers.com> wrote:
>
> It was in 2012 I had troubles with mine, not sure I know where the spare processors are now but this is what I did back then, it explains a bit about them.
>
> forums.arcade-museum.com/showthread.php?t=236502
>
>
> Sent from my iPhone
> Please excuse any spelling or grammar mistakes as this was sent from my iPhone
>
>> On 4 Aug 2016, at 7:46 am, Andrew Finn via Techtoolslist <techtoolslist at flippers.com> wrote:
>>
>> I had this on mine, it was the display processor at fault, once replaced mine worked well ever since, I used a processor with built in rom as the ones they used had a piggy back rom and were only designed for prototyping and do tend to fail these days
>>
>> Regards
>> Andrew
>>
>> Sent from my iPhone
>> Please excuse any spelling or grammar mistakes as this was sent from my iPhone
>>
>>> On 4 Aug 2016, at 6:14 am, Ian Eure <ieure at icloud.com> wrote:
>>>
>>> I’m sure some of you noticed a large amount of Fluke equipment listed on eBay recently. I picked up the new in box 9100A, since I’ve been looking for one and I had an offer accepted at a price I thought wasn’t too out of line, considering that it came with a probe and clock module & was new in original packaging.
>>>
>>> Unfortunately, the mainframe itself doesn’t seem to boot up. When it’s powered on, I get nothing at all on the VFD, no beeps, and the RUN UUT & DISK ACCESS annunciator LEDs are lit steady. I see in the technical manual that blinking UUT/DISK LEDs are a sign of display problems, but I don’t see anything indicating what solid LEDs would mean. I opened it up and found the SCSI card
>>>
>>> I was thinking that perhaps the HDD wasn’t working, or didn’t have the software installed on it, but I’d expect to see something on the display even if that was the case.
>>>
>>> Does anyone have suggestions to diagnose further before I ask for a partial refund?
>>>
>>> Thanks,
>>> Ian.
>>> _______________________________________________
>>> Techtoolslist mailing list
>>> Techtoolslist at flippers.com
>>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
More information about the Techtoolslist
mailing list