[Techtoolslist] Fluke 1802 pod probe head part#

[Ian Eure]

I just checked mine, it has a 680595 cable, a CPU in the pod socket, and passes self-test. If yours is missing the CPU, you might try installing one before giving up.

Unfortunately, there don’t seem to be any scans of the manual in the usual places (though there are some copies on eBay), so I can’t say for  sure if the CPU is required. It would also be nice to know what’s up with the extra DB9 connectors — maybe the pod plugs into the probe jack on a 9010a & its probe plugs into the pod?

> On Sep 24, 2016, at 11:21 AM, Tony Jones <tony at tonyjones.com> wrote:
> 
> Does anyone know the part# (6 digits) for the 1802 pod probe head?
> It's not listed on the flippers page.
> 
> I have one in NOS condition but it has broken pins on the probe head.
>  The cable part# on it was 680595 but this is normally for the
> 8048/8041 and,8051 pods.   I tried another 680595 cable but it's still
> not working.
> 
> It's pretty worthless so if the cable is correct and it's just dead,
> I'm going to cannibalize it for parts.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/