[Techtoolslist] Fluke 1802 pod probe head part#

[Ian Eure]

My understanding is that the grounds in the twisted pairs are all tied to the CPU’s GND pin, so as long as the devices have GND in the same position (and same number of pins, obviously), the cable can swap over.

The only other difference I’m aware of is the cable length — a shorter cable is required for higher speed devices. You can see this in the Z80 to Z80/AA conversion instructions.

> On Sep 24, 2016, at 1:29 PM, Tony Jones <tony at tonyjones.com> wrote:
> 
> I have the manual. I'll scan it in.  It didn't dawn on me to check it for
> the part#.  Doh!  Interesting it shares the same cable as the 8041/8051
> pods as they are pretty dissimilar.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/