[Techtoolslist] Slowing down a Fluke Z80 pod?

[David Gersic]

On Sunday, September 17, 2017 12:16:19 PM Tony Jones wrote:
> The pod normally uses the uut clock (and rate). Also the link you posted
> for the adapter does not work for me.

Looks like he moved it to http://www.macros-arcade.com/s2650_fluke_adapter.htm



> On Sep 17, 2017 9:47 AM, "David Gersic" <info at zaccaria-pinball.com> wrote:
> 
> 
> So what I'm thinking is that the Z80, running at a faster clock speed than
> the
> 2650, is just over-running what a board designed for a slower processor can
> deliver. Is it possible to slow down the clock speed on the Z80 pod?
> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/