[Techtoolslist] Fluke 9100 Service Kit 818948?

[teeray]

Kryoflux stream format is not the standard.  How would people without a Kryoflux board
write the disk image ?


All you need is a raw dump of the disk.

Then everyone can write the image to a disk.


Tim



-----Original Message-----
>From: Tony Jones via Techtoolslist <techtoolslist at flippers.com>
>Sent: Aug 10, 2018 11:37 PM
>To: John Robertson <jrr at flippers.com>, Technical Tools Mail List <techtoolslist at flippers.com>
>Cc: Tony Jones <tony at tonyjones.com>
>Subject: Re: [Techtoolslist] Fluke 9100 Service Kit 818948?
>
>On Fri, Aug 10, 2018 at 4:23 PM, John Robertson <jrr at flippers.com> wrote:
>
>> So far have found a
>> pair of floppies labelled "9100A/AF UUT Test Disk V1.0" which may be the
>> above mentioned disks for the Service Kit.
>
>I have several copies of this disk. I thought it had already been
>archived in the github archive but I just checked again and I don't
>see it.
>It's best if it gets dumped in Kryoflux stream format,  same as all
>the other 9100 disks.   There isn't much point having a few outliers
>stored on the ftp site in some other format.
>
>Curious on the extended board.   Does it have a ZIF on it?   I have a
>half dozen mystery extender boards with ZIFs on them.
>
>Obviously all of the above is handled totally differently on the FT
>version, per the sync connector on the mainboard.
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist at flippers.com
>https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/