[Techtoolslist] Fluke 9010 bus test address tied message confusion

[David Shoemaker]

Working on one.  Here is the gist of it, right now it's all about playing with the memory as I try to figure out some address issues.  Will expand it as I get time.

Attached the file.

David

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Douglas Gauck via Techtoolslist
Sent: Sunday, July 21, 2019 5:54 PM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Cc: Douglas Gauck <douglasgb at mac.com>
Subject: Re: [Techtoolslist] Fluke 9010 bus test address tied message confusion

I can’t help with the twisted pair cables, but am wondering if you have any Fluke Space Invaders scripts to share.

-Douglas


> On Jul 21, 2019, at 8:44 PM, David Shoemaker <davids at oz.net> wrote:
> 
> ...
> At the end of the day all 3 pods work with the twisted pair cable.  
> But ONLY with that cable.
> 
> So where do I get new twisted pair cables for these?  Anyone?
> 
> David
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SI.9LC
Type: application/octet-stream
Size: 2459 bytes
Desc: not available
URL: <https://pairlist7.pair.net/pipermail/techtoolslist/attachments/20190721/4e15d242/attachment-0001.obj>