[Techtoolslist] Fluke 9100A - Cannot boot from system disks

[Marc Desfossés]

Hi,

I have a rev G. board but the rest is the same. The extra 2Mb SIMMS are on their way, I will report back when they will be installed.

Thanks for your help !

Marc

________________________________
De : Tony Jones <tony at tonyjones.com>
Envoyé : 19 mars 2020 13:05
À : Technical Tools Mail List <techtoolslist at flippers.com>
Cc : Marc Desfossés <mdesfoss at hotmail.com>
Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks

I just tested with the following configuration.

I am able to boot from the 3 system floppy images without issue.

Best guess at this point, try upgrading to 4MB RAM.  Maybe it's a requirement for V5.0.
I've never seen a system with less than 4MB.

Tony

---------------------------------------------------------------------

Fluke 9100A.  Mainboard rev H
4MB System RAM
ROM version 5.0
Floppy drive type: Sony F17
Disc Error reporting: on

Gotek running FlashFloppy firmware version 2.14

$ cat FF.CFG
host = fluke
write-protect = yes

$ md5sum *.hfe
462ce16ae015aef52fcf45ed43c797ad *master60_1.hfe
fb801cad7ba43a6b12f68fa4872ee9b4 *master60_2.hfe
e2b9d9c9bf083b271b34314f4d655827 *svc1.4.hfe
d4b5b47ea9501dd7375498d1474e5514 *sys61_1.hfe
165cc387db4103b867277e74afacc02e *sys61_2.hfe
654f2cec1e6a0e6655aefd04a7b38b27 *sys61_3.hfe