[Techtoolslist] Fluke 9105A

[William Stillwell]

Keven, also, Re: "I have a 9010, with pods, and I'm hoping this unit will
do more for me."

Sadly, Unless you want to start learning how to program TL/1 , it will
actually do Less.. as nobody has reverse engineered the Fluke Signature
routines on the 91XX series yet, so the only way to get signatures is from
good working test hardware that you then can compare against other gear.

There is a CRC32 TL Script, but you will need a Monitor and Video Card?
(maybe, i am not sure if you can run the CRC script from Floppy )


Tony, what about the 9110FT ? I have one of these that collects dust ( as i
primarily use my my 9100FT )


William Stillwell


Board Member - Inspiration labs, Inc. a 501c3 organization

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization

Member of MakerFX - a 501c3 organization

Former Board Member - West Central Florida Group - a 501c3 Organization.


On Mon, Mar 1, 2021 at 9:03 PM Tony Jones <tony at tonyjones.com> wrote:

> On Mon, Mar 1, 2021 at 4:50 PM Kevin Moore <talon.k at gmail.com> wrote:
>
> > the RTC is dead,
> >
>
> Expose the battery terminals on the chip and solder on an aux battery cell
> (google; lots of threads on this). Or take your chances with Chinese
> replacement chips,
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>