[Techtoolslist] Looking for Kurz Kasch 410A Pole Position card

[Jeff Anderson]

We took it off-list, but I have some cards getting sent Matt's way.

On Sun, Dec 19, 2021 at 3:09 PM Jim Mizzell <jmizzell at gmail.com> wrote:

> Not me.
>
> Good luck!
>
> Jim
>
> On Wed, Dec 15, 2021 at 4:30 PM Jeff Anderson <amplifone at gmail.com> wrote:
>
> > I have a still-sealed new 410A if you want to borrow it to use or copy. I
> > don't know that I'd actually care about keeping it outside of having a
> > fairly complete set of KK cards, but I can't imagine I'd ever use this
> one
> > as the PAT already covers PP.
> >
> > I was just testing some PP sets on a PAT9000 a couple days ago and even
> > that rig already has a little bit of a tough time powering them.  I'm
> > probably going to modify a plug for the external power like they did with
> > later high-current boards like I,Robot, system 1/2, Hard Drivin, etc. -
> I'd
> > think just rolling your own harness and using a switcher PSU would be
> less
> > awkward than using a TF-650 for testing PP boards.
> >
> > On Tue, Dec 14, 2021 at 4:44 PM Matthew Rossiter <matt at rossiters.com>
> > wrote:
> >
> > > One thing I've done in the past is get these 22/44 pin bus extender
> > > cards and just re-purpose other Kurz Kasch cards.
> > >
> > >
> > >
> >
> https://www.corshamtech.com/product/2244-pin-extender/?attribute_pa_build-options=bare-pc-board
> > >
> > > So I could use a Tempest card to drive a pole position board, for
> > > example.   I could wire up the gas to one of the Pots, but figure it'd
> > > be easier to ask the group first.  Especially since I may be able to
> > > offer some interesting trades.  ;)
> > >
> > > Also, since it's getting cheaper to produce pcb's now, another idea
> > > would be to just design one in software.  I have the photo and
> > > schematics for a Gravitar 409A as an example.   I'm a newbie in that
> > > department though,  I'm trying to learn KiCad but suggestions are
> > welcome.
> > >
> > > Matt
> > >
> > >
> > > On 12/14/2021 1:18 PM, John Robertson via Techtoolslist wrote:
> > > > On 2021/12/14 12:59 p.m., Matthew Rossiter wrote:
> > > >> Just curious if anyone has an extra one in their stash somewhere?
> > > >> I'm in the process of building an actual test harness, but these
> > > >> cards save so much space and time in my little garage bench.
> > > >>
> > > >> Matt
> > > >>
> > > >> ______
> > > > All I have is the PDF of the card instructions. Never saw that one! I
> > > > have the PP adapter for my Atari Orange box - which doesn't help you
> > > > though.
> > > >
> > > > Perhaps someone here has the card and can provide some photos of it -
> > > > front and back - so Matt can fake one up using one of those blank
> > > > cards that were listed here a few years back...
> > > >
> > > > John :-#)#
> > > >
> > > _______________________________________________
> > > Techtoolslist mailing list
> > > Techtoolslist at flippers.com
> > > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > >
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
>
>
> --
> Jim Mizzell
> jmizzell at gmail.com
> 615-459-5902 or 615-821-6188
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>