[Techtoolslist] 9100FT RTC

[William Stillwell]

How is the image obsolete? I used it on my scsi2sd . ( FYI, scsi2sd is also
obsolete now, everyone is going to RaSCSI )

William Stillwell




On Thu, Mar 17, 2022 at 10:53 AM Tony Jones <tony at tonyjones.com> wrote:

> On Thu, Mar 17, 2022, 7:17 AM William Stillwell <ki4swy at gmail.com> wrote:
>
> > I would convert the Spinny HDD to a CF Card.
> >
> > Andy's Arcade has a premade 64mb CF Card Image ->
> >
> > https://www.andysarcade.net/personal/tech/fluke9100/index.htm
>
>
> This is ancient.  The scsi2sd solution has long obsoleted this.
>
> maybe it is possible the system is failing to start because of a Disk I/O
> > Error?
>
>
> It should be possible to boot the system normally using just the 3 floppies
> and he reports this also fails.
>
> Maybe his system floppies are bad and so is the HDD.  Anything is possible.
>
> Kevil since you can boot the service disk with the scsi card removed (it is
> very odd you cannot using soft f2 f4) I would suggest enabling the
> reporting of Io errors.    See if this helps.
>
> Tony
>
>
>
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>