[Techtoolslist] HP1660C/CS/CP Logic Analyzer information on upgrades? Floppies?

[William Stillwell]

I use my 169xx frames with windows 7, much easier to use, the 166x were
nice for xwindow control, i use my 166x still with my HP Preprocessors, as
i have yet to migrate them over to the new 169xx as it will require some
coding.

William Stillwell




On Fri, Apr 14, 2023 at 3:24 PM John Robertson via Techtoolslist <
techtoolslist at flippers.com> wrote:

> On 2023/04/14 12:09 p.m., David Shoemaker wrote:
> > I have a one, used it a couple of times. It's just cumbersome to set
> > up the names. I connect to it over x windows to get a better keyboard
> > and display from my windows machine.
> >
> > Most of the time I am using a cheep saleae  clone usb based analyzer.
> > I only get 16 channels vs the hp's 128 but the simplicity of capture
> > is a benifit.
>
> Thanks for the tip about X-Windows. Found a discussion on eevblog on
> that topic:
>
>
> https://www.eevblog.com/forum/testgear/hp1660-logic-analyser-and-communicating-through-x-windows-setup/
>
> John :-#)#
>
> --
>                   John's Jukes Ltd.
> 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
> Call (604)872-5757 (Pinballs, Jukes, Video Games)
>                   flippers.com
>   "Old pinballers never die, they just flip out"
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>