[Techtoolslist] HP1660C/CS/CP Logic Analyzer information on upgrades? Floppies?

[William Stillwell]

On thr 16900 frame, adding option 100 grants you to run the protocol
analyzer which should allow you to do that.

On Fri, Apr 14, 2023, 5:48 PM <davids at oz.net> wrote:

> I have been trying to figure out how to write some post processing, I
> think it would be handy to say record everything happening at the state
> machine prom of a tempest board and "disassemble" the vector engine as it
> runs, for those really weird errors where like one vector instruction is
> broken.
>
> -----Original Message-----
> From: Techtoolslist <techtoolslist-bounces at flippers.com> On Behalf Of
> William Stillwell
> Sent: Friday, April 14, 2023 12:53 PM
> To: jrr at flippers.com; Technical Tools Mail List <
> techtoolslist at flippers.com>
> Subject: Re: [Techtoolslist] HP1660C/CS/CP Logic Analyzer information on
> upgrades? Floppies?
>
> I use my 169xx frames with windows 7, much easier to use, the 166x were
> nice for xwindow control, i use my 166x still with my HP Preprocessors, as
> i have yet to migrate them over to the new 169xx as it will require some
> coding.
>
> William Stillwell
>
>
>
>
> On Fri, Apr 14, 2023 at 3:24 PM John Robertson via Techtoolslist <
> techtoolslist at flippers.com> wrote:
>
> > On 2023/04/14 12:09 p.m., David Shoemaker wrote:
> > > I have a one, used it a couple of times. It's just cumbersome to set
> > > up the names. I connect to it over x windows to get a better
> > > keyboard and display from my windows machine.
> > >
> > > Most of the time I am using a cheep saleae  clone usb based analyzer.
> > > I only get 16 channels vs the hp's 128 but the simplicity of capture
> > > is a benifit.
> >
> > Thanks for the tip about X-Windows. Found a discussion on eevblog on
> > that topic:
> >
> >
> > https://www.eevblog.com/forum/testgear/hp1660-logic-analyser-and-commu
> > nicating-through-x-windows-setup/
> >
> > John :-#)#
> >
> > --
> >                   John's Jukes Ltd.
> > 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757
> > (Pinballs, Jukes, Video Games)
> >                   flippers.com
> >   "Old pinballers never die, they just flip out"
> >
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>