[Techtoolslist] Fluke 9010A Input voltage

[Rodger Boots]

Be careful, a lot of times when you change voltage you also should 
change the fuse.
In the case of the 9010A the line fuse should be 1A fast blow for 120 V 
and 1/2 A fast blow for 240 V.



Filip Hautekeete wrote:


> Hello Steve,

>  

> You are correct. Thanks to John Robertson I figured out there is a 

> slide card for voltage selection behind the fuse panel. No need to 

> drag the systems out of your garage ;-)

>  

> Thanks for your help!

>  

> Filip