[Techtoolslist] Kool Tools: IC Comparator checks PROMs

[Tom McClintock]

You are correct sir! Ahhahahha. Yes!


John Robertson wrote:

> Don't you have to make a separate board for each IC? I also have one of 

> those buried in a drawer - mine has a "Universal" board that you can 

> install any IC into and jumper - but way to time consuming...if I'm 

> right that is.

> 

> John :-#)#

> 

> At 1:54 PM -0600 2/24/06, Tom McClintock wrote:

> 

>> I take it those of us with an HP 10529A Logic Comparator aren't so 

>> lucky with the PROM capability?

>>

>>

>>

>>

>> tm

>>

>> John Robertson wrote:

>>

>>> The CMOS tester is very easy to use. Simply GLOMP the correct IC test 

>>> clip on the IC in question, flip the toggle switches in if any pins 

>>> are tied to Vcc or Gnd (power usually, but other tied pins would be 

>>> good).

>>>

>>> Kev has a write up: http://users.erols.com/mowerman/bugtrap.htm

>>>

>>> I have the manuals if no=one can find them on-line then I'll try to 

>>> get around to scanning them.

>>>

>>> John :-#)#

>>>

>>> At 12:57 PM -0500 2/24/06, Electronicamuse at aol.com wrote:

>>>

>>>> In a message dated 2/24/2006 12:13:47 P.M. Eastern Standard Time, 

>>>> jrr at flippers.com writes:

>>>>

>>>> Disclaimer:  I don't work for BUGTRAP...

>>>>

>>>> Good thing, since I think that they disbanded 2 decades ago.  :)

>>>>

>>>> Could you share your Bugtrap setting/instructions?  I have a Bugtrap 

>>>> CMOS and regular version.  I never took the time to learn to use it. 

>>>> Damn to-do list is pretty long.  :)

>>>>

>>>> Dave

> 

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> 

> 

>