[Techtoolslist] Kool Tools: IC Comparator checks PROMs

[Andy Welburn]

You can make one IC board per board if you really wanted to, but every
single 10529A was shipped with a ZIF board AFAIK, virtually everyone that
turns up on ebay in its box has the ZIF board.

So in actual fact, the HP is more compact than the Bugtrap, and you don't
need to supply 5v via fly leads as the HP takes its power from the IC under
test..

I've been using the HP for years, pretty invaluable, but I've never tried it
with proms, good idea tho, in theory it should show up comparison
differences the same that a bugtrap does.

Andy Welburn
www.andysarcade.net


> -----Original Message-----

> From: techtoolslist-bounces at flippers.com [mailto:techtoolslist-

> bounces at flippers.com] On Behalf Of John Robertson

> Sent: 24 February 2006 21:07

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Kool Tools: IC Comparator checks PROMs

> 

> Don't you have to make a separate board for each IC? I also have one

> of those buried in a drawer - mine has a "Universal" board that you

> can install any IC into and jumper - but way to time consuming...if

> I'm right that is.

> 

> John :-#)#

> 

> At 1:54 PM -0600 2/24/06, Tom McClintock wrote:

> >I take it those of us with an HP 10529A Logic Comparator aren't so

> >lucky with the PROM capability?

> >

> >

> >

> >

> >tm

> >

> >John Robertson wrote:

> >>The CMOS tester is very easy to use. Simply GLOMP the correct IC

> >>test clip on the IC in question, flip the toggle switches in if any

> >>pins are tied to Vcc or Gnd (power usually, but other tied pins

> >>would be good).

> >>

> >>Kev has a write up: http://users.erols.com/mowerman/bugtrap.htm

> >>

> >>I have the manuals if no=one can find them on-line then I'll try to

> >>get around to scanning them.

> >>

> >>John :-#)#

> >>

> >>At 12:57 PM -0500 2/24/06, Electronicamuse at aol.com wrote:

> >>

> >>>In a message dated 2/24/2006 12:13:47 P.M. Eastern Standard Time,

> >>>jrr at flippers.com writes:

> >>>

> >>>Disclaimer:  I don't work for BUGTRAP...

> >>>

> >>>Good thing, since I think that they disbanded 2 decades ago.  :)

> >>>

> >>>Could you share your Bugtrap setting/instructions?  I have a

> >>>Bugtrap CMOS and regular version.  I never took the time to learn

> >>>to use it. Damn to-do list is pretty long.  :)

> >>>

> >>>Dave

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist