[Techtoolslist] Fluke 9100 pod recognition after software install

[Art Mallet - Artfromny]

UPS on the 2 boxes was 44.72

I had NO idea these things were so damn complicated - I will stick to the 
9010 for my own use :)
Remember I have one more main unit, complete, for sale - I also sold one 
that I may have to take back (bad HDD) - if you have any interest in them
Art

----- Original Message ----- 
From: "Alex Yeckley" <ayeckley at sierralobo.com>
To: "'Technical Tools Mail List'" <techtoolslist at flippers.com>
Sent: Wednesday, January 10, 2007 10:56 PM
Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software 
install



> >sure enough, i formatted the drive

>

> Anyone familiar with the "controller returned error f6h" message?  I'm

> getting that consistently when I try to format my Miniscribe, regardless 

> of

> which interleave option I select (0-6).  I've swapped out the MFM/SCSI

> adapter as well as the interface board.  IIRC, I'm even getting that 

> message

> using different drives.  Running ROM rev 5, and using Service Disk image 

> 1.4

> that Andy provided earlier today.

>

> Alex

> ----

> ayeckley at elektronforge.com

> www.elektronforge.com

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>