[Techtoolslist] Fluke 9100 pod recognition after software install

[Art Mallet - Artfromny]

Sorry, that should not have made it to the list
Art

----- Original Message ----- 
From: "Art Mallet - Artfromny" <artfromny at nycap.rr.com>
To: <ayeckley at sierralobo.com>; "Technical Tools Mail List" 
<techtoolslist at flippers.com>
Sent: Wednesday, January 10, 2007 11:05 PM
Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software 
install



> UPS on the 2 boxes was 44.72

>

> I had NO idea these things were so damn complicated - I will stick to the

> 9010 for my own use :)

> Remember I have one more main unit, complete, for sale - I also sold one

> that I may have to take back (bad HDD) - if you have any interest in them

> Art

>

> ----- Original Message ----- 

> From: "Alex Yeckley" <ayeckley at sierralobo.com>

> To: "'Technical Tools Mail List'" <techtoolslist at flippers.com>

> Sent: Wednesday, January 10, 2007 10:56 PM

> Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software

> install

>

>

>> >sure enough, i formatted the drive

>>

>> Anyone familiar with the "controller returned error f6h" message?  I'm

>> getting that consistently when I try to format my Miniscribe, regardless

>> of

>> which interleave option I select (0-6).  I've swapped out the MFM/SCSI

>> adapter as well as the interface board.  IIRC, I'm even getting that

>> message

>> using different drives.  Running ROM rev 5, and using Service Disk image

>> 1.4

>> that Andy provided earlier today.

>>

>> Alex

>> ----

>> ayeckley at elektronforge.com

>> www.elektronforge.com

>>

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>