[Techtoolslist] 9010a RS232 problem?

[Bill Karkula]

If it's the same error as the serial Data I/O Promlink, you can ignore the
error and continue - I think the program looks for two serial ports and
reports the error since there is only one.  

Bill

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore
Sent: Friday, January 08, 2010 7:42 AM
To: jrr at flippers.com; Technical Tools Mail List
Subject: Re: [Techtoolslist] 9010a RS232 problem?

Ok I've found a U2 to be bad the MC14411 the D/A convertor, on the RS-232
board. So now the fluke doesn't reset,

The FIDE program is giving me an error of invalid port. Not sure how that
could be since there is only 1 serial port, and I've got the program setup
to use it.

So I'm going to have to go through my setup again and double check
everything, but progress is being made slowly.

Kevin


On Tue, Jan 5, 2010 at 11:33 AM, Kevin Moore <talon.k at gmail.com> wrote:


> Yeah the script is the next thing I'm going to try as soon as I figure out

> how to manually program this thing. Which is what I got the Rs-232

optioned

> one for in the first place, to avoid having to type on that keyboard more

> than I have to.

>

> Kevin

>

>

>

> On Tue, Jan 5, 2010 at 10:29 AM, John Robertson <jrr at flippers.com> wrote:

>

>> Kevin Moore wrote:

>>

>>> It's doing a power on reset, after pressing "Aux i/f", then "Read", then

>>> "Enter". It will state Receiving, then reset after about 2 secs. It then

>>> comes back on stating Fluke 9000 restarted, self test ok.

>>>

>>> Kevin

>>>

>>>

>>>

>>> On Tue, Jan 5, 2010 at 8:28 AM, Tim Matthews <trmatthe at gmail.com> wrote:

>>>

>>>

>>>

>>>>  -----Original Message-----

>>>>>> From: techtoolslist-bounces at flippers.com

>>>>>> Subject: Re: [Techtoolslist] 9010a RS232 problem?

>>>>>>

>>>>>> It's not a pod problem, I can use the fluke normally w/o problem. I'm

>>>>>> trying

>>>>>> to hook up the rs232 to a computer to upload scripts. It only resets

>>>>>>

>>>>>>

>>>>> after

>>>>>

>>>>>

>>>>>> hitting enter/yes after doing an Aux/if, read. while trying to send a

>>>>>> script

>>>>>>

>>>>>>

>>>>>

>> If you have a second 9010 and a Z80 pod then you can use it to test the

>> RS-232 card in your current machine - I seem to recall a script for doing

>> that using a loop-back jumper...buried in the 9010 service manuals.

>>

>> John :-#)#

>>

>>  Hi Kevin,

>>>>

>>>> Can you describe exactly what is being shown on the Fluke display when

>>>> it

>>>> fails?

>>>> I'm not sure if you are describing the Fluke doing a Power-On Reset, or

>>>> whether it's

>>>> just dropping out of RX mode.

>>>>

>>>> cheers

>>>> tim

>>>> _______________________________________________

>>>> Techtoolslist mailing list

>>>> Techtoolslist at flippers.com

>>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>>>

>>>>

>>>>

>>> _______________________________________________

>>> Techtoolslist mailing list

>>> Techtoolslist at flippers.com

>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>>

>>>

>>>

>>>

>>

>>

>> --

>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call

>> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)

>>                www.flippers.com "Old pinballers never die, they just flip

>> out"

>>

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>

>

>

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.725 / Virus Database: 270.14.130/2607 - Release Date: 01/08/10
01:35:00