[Techtoolslist] 9010a RS232 problem?

[Kevin Moore]

Success!!

I reset all the comm port info in the Bios, and reset up everything.. Was
able to load a test script, and then compile one from qtr arcade..

One thing I noticed though from the script compiler from atr arcade. It
doesn't set trap active force line = no. No big deal just add that line to
the script and it works..

Not that it would make a difference, but when I do a rom test, I like to use
the more function to see what the sig actually is. That's helped a couple of
times to figure out that I put a rom in the wrong socket.

I can't wait to get to work on some scripts now!!

Thanks for all the input..

Kevin


On Fri, Jan 8, 2010 at 9:12 AM, Bill Karkula <wkarkula at comcast.net> wrote:


> If it's the same error as the serial Data I/O Promlink, you can ignore the

> error and continue - I think the program looks for two serial ports and

> reports the error since there is only one.

>

> Bill

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore

> Sent: Friday, January 08, 2010 7:42 AM

> To: jrr at flippers.com; Technical Tools Mail List

> Subject: Re: [Techtoolslist] 9010a RS232 problem?

>

> Ok I've found a U2 to be bad the MC14411 the D/A convertor, on the RS-232

> board. So now the fluke doesn't reset,

>

> The FIDE program is giving me an error of invalid port. Not sure how that

> could be since there is only 1 serial port, and I've got the program setup

> to use it.

>

> So I'm going to have to go through my setup again and double check

> everything, but progress is being made slowly.

>

> Kevin

>

>

> On Tue, Jan 5, 2010 at 11:33 AM, Kevin Moore <talon.k at gmail.com> wrote:

>

> > Yeah the script is the next thing I'm going to try as soon as I figure

> out

> > how to manually program this thing. Which is what I got the Rs-232

> optioned

> > one for in the first place, to avoid having to type on that keyboard more

> > than I have to.

> >

> > Kevin

> >

> >

> >

> > On Tue, Jan 5, 2010 at 10:29 AM, John Robertson <jrr at flippers.com>

> wrote:

> >

> >> Kevin Moore wrote:

> >>

> >>> It's doing a power on reset, after pressing "Aux i/f", then "Read",

> then

> >>> "Enter". It will state Receiving, then reset after about 2 secs. It

> then

> >>> comes back on stating Fluke 9000 restarted, self test ok.

> >>>

> >>> Kevin

> >>>

> >>>

> >>>

> >>> On Tue, Jan 5, 2010 at 8:28 AM, Tim Matthews <trmatthe at gmail.com>

> wrote:

> >>>

> >>>

> >>>

> >>>>  -----Original Message-----

> >>>>>> From: techtoolslist-bounces at flippers.com

> >>>>>> Subject: Re: [Techtoolslist] 9010a RS232 problem?

> >>>>>>

> >>>>>> It's not a pod problem, I can use the fluke normally w/o problem.

> I'm

> >>>>>> trying

> >>>>>> to hook up the rs232 to a computer to upload scripts. It only resets

> >>>>>>

> >>>>>>

> >>>>> after

> >>>>>

> >>>>>

> >>>>>> hitting enter/yes after doing an Aux/if, read. while trying to send

> a

> >>>>>> script

> >>>>>>

> >>>>>>

> >>>>>

> >> If you have a second 9010 and a Z80 pod then you can use it to test the

> >> RS-232 card in your current machine - I seem to recall a script for

> doing

> >> that using a loop-back jumper...buried in the 9010 service manuals.

> >>

> >> John :-#)#

> >>

> >>  Hi Kevin,

> >>>>

> >>>> Can you describe exactly what is being shown on the Fluke display when

> >>>> it

> >>>> fails?

> >>>> I'm not sure if you are describing the Fluke doing a Power-On Reset,

> or

> >>>> whether it's

> >>>> just dropping out of RX mode.

> >>>>

> >>>> cheers

> >>>> tim

> >>>> _______________________________________________

> >>>> Techtoolslist mailing list

> >>>> Techtoolslist at flippers.com

> >>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >>>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> >>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >>>>

> >>>>

> >>>>

> >>> _______________________________________________

> >>> Techtoolslist mailing list

> >>> Techtoolslist at flippers.com

> >>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> >>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >>>

> >>>

> >>>

> >>>

> >>

> >>

> >> --

> >> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call

> >> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)

> >>                www.flippers.com "Old pinballers never die, they just

> flip

> >> out"

> >>

> >>

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >>

> >

> >

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> No virus found in this incoming message.

> Checked by AVG - www.avg.com

> Version: 9.0.725 / Virus Database: 270.14.130/2607 - Release Date: 01/08/10

> 01:35:00

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>