[Techtoolslist] FLUKE 9100A SERIES QUESTION

[AL SACCO]

I only attached pods when power was off ....

John Robertson <jrr at flippers.com> wrote:


>AL SACCO_hm wrote:

>> HELP FOR FLUKE 9100 USER

>>

>> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....

>> if no pod is attached to 9100 during it comes up "no pod connected".....

>> if any pod is attached it comes up "enabled line caused timeout"

>> any idea or help would be helpful.....

>>

>> AL SACCO

>> _______________________________________________

>>   

>

>As I recall you can't hook up a pod while the power is on, only when off...

>

>John :-#)#

>

>-- 

>John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 

>Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)

>                 www.flippers.com 

>"Old pinballers never die, they just flip out"

>

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist

>FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>