[Techtoolslist] FLUKE 9100A SERIES QUESTION

[AL SACCO]

Thanks for the help. !!!!!
.

"martin at guddler.co.uk" <martin at guddler.co.uk> wrote:


>Al,

>

>Do you have the ribbon cable in the test socket? If so, this is normal behavior.

>

>Martin.

>

>Sent from my iPhone

>

>On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007 at hotmail.com> wrote:

>

>> HELP FOR FLUKE 9100 USER

>> 

>> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....

>> if no pod is attached to 9100 during it comes up "no pod connected".....

>> if any pod is attached it comes up "enabled line caused timeout"

>> any idea or help would be helpful.....

>> 

>> AL SACCO

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist

>FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>