[Techtoolslist] 9100FT

[John Robertson]

Update on the 9100 and SCSI eliminators...spotted another variation on 
different mail list and bought it for testing. Cost all of $75 and 
postage...

http://www.codesrc.com/src/scsi2sd/buy.php

Then I bought a 4GB Kingston Micro SD ($12, can be cheaper of course) 
and programmed it with the code v6_1.rar that I got from:

http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task 14)

Following the procdure outlined  (I use OSX and didn't want to install a 
Linux system) here:

http://doc.freenas.org/index.php/Burning_an_IMG_File#Using_Keka_and_dd_on_an_OS_X_System

Plugged it into my 9100FT and it booted up just fine!

Andy, you may want to update your site.

Note that Michaels SCSI2SD worked right out of the box. Do not add 
jumpers, etc.!

John :-#)#

On 12/20/2013 7:32 AM, Andrew Welburn wrote:

> hey Corey..

>

>  I've now tried the Samdisk version of the service disk fron the ttl 

> ftp site (60serv.dsk) and it still gives me the invalid service id..

>

> can you send me, or upload to the ftp site the patched disk image?? 

> i'd very much appreciate it..

>

> Andrew Welburn

> http://www.andys-arcade.com

>

> On 14/12/2013 16:15, Corey Stup wrote:

>> On 12/14/2013 10:42 AM, Andrew Welburn wrote:

>>> so i went back into the techtools FTP and found the v6 service disk

>>> (SERVICE60.TD0), but i get the following error message when i try it

>>> out on my 9100FT :

>>> http://www.andysarcade.net/pix/DSC_1711.JPG

>>>

>>> "Fluke 9100A Service Init Disk, v6.0

>>> This Board Has An Invalid Service ID"

>>>

>>>  Does this mean it doesn't like the fact its a 9100FT (not 9100A), or

>>> does it mean the disk is serialised to a particular machine? (i

>>> thought by v6 they had done away with serialisation)

>>>

>>> now, there's another disk image on the FTP - 60SERV.dsk - but its in

>>> the SAMdisk format, and i dont have an internal floppy drive any more

>>> to build and test this one...

>>>

>>> could it be that these are two different types of v6 service disk? Can

>>> anyone remember which is which?

>> The 6.0 disk was originally serialized.  I created a patch to remove the

>> serial check at one point, and I thought I uploaded the patched disk.

>> The 6.0 disk doesn't have the SCSI format tools so you still need the

>> V1.4 disk as well.

>>

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>

>



-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist