[Techtoolslist] 9100FT

[Andrew Welburn]

excellent news.. i'll try an update when i get some time.. i'm currently 
in the process of packing up my life into a container for shipping!

Corey - i'd still love to get hold of the non-serialised service floppy 
disk if you can release that?!

thanks!

Andrew Welburn
http://www.andys-arcade.com

On 20/02/2014 00:54, John Robertson wrote:

> Update on the 9100 and SCSI eliminators...spotted another variation on

> different mail list and bought it for testing. Cost all of $75 and

> postage...

>

> http://www.codesrc.com/src/scsi2sd/buy.php

>

> Then I bought a 4GB Kingston Micro SD ($12, can be cheaper of course)

> and programmed it with the code v6_1.rar that I got from:

>

> http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task 14)

>

> Following the procdure outlined  (I use OSX and didn't want to install a

> Linux system) here:

>

> http://doc.freenas.org/index.php/Burning_an_IMG_File#Using_Keka_and_dd_on_an_OS_X_System

>

>

> Plugged it into my 9100FT and it booted up just fine!

>

> Andy, you may want to update your site.

>

> Note that Michaels SCSI2SD worked right out of the box. Do not add

> jumpers, etc.!

>

> John :-#)#

>

> On 12/20/2013 7:32 AM, Andrew Welburn wrote:

>> hey Corey..

>>

>>  I've now tried the Samdisk version of the service disk fron the ttl

>> ftp site (60serv.dsk) and it still gives me the invalid service id..

>>

>> can you send me, or upload to the ftp site the patched disk image??

>> i'd very much appreciate it..

>>

>> Andrew Welburn

>> http://www.andys-arcade.com

>>

>> On 14/12/2013 16:15, Corey Stup wrote:

>>> On 12/14/2013 10:42 AM, Andrew Welburn wrote:

>>>> so i went back into the techtools FTP and found the v6 service disk

>>>> (SERVICE60.TD0), but i get the following error message when i try it

>>>> out on my 9100FT :

>>>> http://www.andysarcade.net/pix/DSC_1711.JPG

>>>>

>>>> "Fluke 9100A Service Init Disk, v6.0

>>>> This Board Has An Invalid Service ID"

>>>>

>>>>  Does this mean it doesn't like the fact its a 9100FT (not 9100A), or

>>>> does it mean the disk is serialised to a particular machine? (i

>>>> thought by v6 they had done away with serialisation)

>>>>

>>>> now, there's another disk image on the FTP - 60SERV.dsk - but its in

>>>> the SAMdisk format, and i dont have an internal floppy drive any more

>>>> to build and test this one...

>>>>

>>>> could it be that these are two different types of v6 service disk? Can

>>>> anyone remember which is which?

>>> The 6.0 disk was originally serialized.  I created a patch to remove the

>>> serial check at one point, and I thought I uploaded the patched disk.

>>> The 6.0 disk doesn't have the SCSI format tools so you still need the

>>> V1.4 disk as well.

>>>

>>>

>>> _______________________________________________

>>> Techtoolslist mailing list

>>> Techtoolslist at flippers.com

>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>

>>

>

>