[Techtoolslist] Fluke 9020A troubleshooter - swapping ieee488 i/f for rs232 i/f

[William Stillwell]

Look at your keyboard on the Fluke 9020A.

Do you have the AUX I/F,  Program and Execute Buttons?

If you want an RS232 Board, I will be happy to sell you an original for $150
- however, I don't think it will do you any good in the 9020A ... 


-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Andy Smout
Sent: Tuesday, March 17, 2015 6:50 AM
To: techtoolslist at flippers.com
Subject: Re: [Techtoolslist] Fluke 9020A troubleshooter - swapping ieee488
i/f for rs232 i/f

william,  apparently a -001 option, not a -003 option.
but please be gentle with me i am just starting out with fluke 9000's!
when i get the service and user manuals i'll have better info to work from.
interestingly, the 9010a service manual (after page 6-2 of the 9010a service
manual) states on page 001-1 in the theory of operation that the rs232 card
is auto detected.
i guess i am hoping that the 9020a will auto detect this card!
for completeness sake, the following labels are attached:
- 9020A-002/AB (sticker on bronze bracket over piggy-back assy)
- piggyback assy 649459, 9000a-3004 rev b
- piggyback assy U1 1.0 649491
- piggyback assy U2 1.0 651463
- u18 1.0 649509
- u19 1.0 649517
- u20 1.0 651448
- u21 1.0 651455
- iee488 rom u2 1.0 649483


_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/