[Techtoolslist] 9010 ram pattern error?

[David Shoemaker]

Looping results in an unstable OK / Err condition.  

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Tony Jones
Sent: Sunday, April 2, 2017 6:34 PM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] 9010 ram pattern error?

On Sun, Apr 2, 2017 at 5:46 PM, David Shoemaker <davids at oz.net> wrote:
> I have never been able to wrap my head around the pattern error.

The long test is looking for pattern sensitive errors (nearest neighbor).

What happens if you LOOP (see 4H-11 in the operators manual).

I've seen similar on a (non arcade) board with a bad bus transceiver but it
can also indicate a fault in the RAM itself.
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/