[Techtoolslist] Souping up the 9100A

[Ian Eure]

On September 5, 2018 10:33:31 PM PDT, Tony Jones via Techtoolslist <techtoolslist at flippers.com> wrote:
>On Wed, Sep 5, 2018 at 10:04 PM, John Robertson <jrr at flippers.com>
>wrote:
>
>> There is that extra expansion slot which is used for the test card,
>and so I
>> expect one could use it for installing the PAK-68 or an adaption of
>it.
>
>I had the same thought.  I'm assuming the test-card (if you ever find
>the instructions) plugs into J4 and some form of cpu accelerator could
>do the same.   Sounds like a fun project.  I thought I'd read
>(somewhere) that Fluke designed an Ethernet card which was intended to
>plug into J4 but it's a very vague recollection.
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist at flippers.com
>https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

I remember this thread as well.  http://seven.pairlist.net/pipermail/techtoolslist/2015q1/002053.html

Never heard anything else about it.