[Techtoolslist] Souping up the 9100A

[William Stillwell]

Maybe the option was vaporware? maybe they never made it?

William Stillwell

Board Member - Inspiration labs, Inc. a 501c3 organization

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization




On Thu, Sep 6, 2018 at 2:43 PM Tony Jones <tony at tonyjones.com> wrote:

> On Thu, Sep 6, 2018 at 10:34 AM, Ian Eure <ian at retrospec.tv> wrote:
>
> > My reading was that the labels had been added by someone, and it wasn't
> screened on the metal.  I've examined four 9100s (two A, two FT), and have
> never seen anything like this.
>
> The screening is present on all 4 of my FTs (2x 9100,  1x 9110, 1x
> 9105).   I don't see similar on any of my three 9100As.
>
> There is nothing different about the pinout of J13 (the expansion
> connector on the FT) vs J4 (same expansion connector on the A) so I
> assume said card would work on both FT and A assuming of course the
> card was ever actually released.   I have no clue what functionality
> the OS exposes via the card and I've never seen mention of it in any
> documentation.
>
> Pic:
> https://drive.google.com/file/d/1ygJB7wqiQlIOIlWuXEZq5xxZ7IdXaZAO/view?usp=sharing
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>