[Techtoolslist] For the Fluke Z8000 Pod - making interface PCB for Z8002 CPU

[John Robertson]

On 2018/09/04 9:00 PM, John Robertson wrote:
> On 2018/09/04 8:42 PM, John Robertson wrote:
>> I have a Z8000 pod and am in the process of making a PCB for the 
>> Z8001 test socket on it so I can test Z8002 (Pole Position of course) 
>> logic. The PCB is to adapt the Z8002 CPU to the Z8001 test socket.
>>
>> I will likely be making two or three of these (minimum quantity) so 
>> if anyone is interested in one for their Z8000 pod please let me know 
>> - @ cost plus postage. I plan on having the PCBs run off either later 
>> this week or next.
>>
>> John :-#)#
>>
> Right, just remembered that I need two of these, one to load the Z8002 
> in the Z8001 socket on the Z8000 pod, and a second to take the 48 pin 
> cable's UUT Z8001 plug and convert that to the 40 pin Z8002 socket on 
> the PP board.
>
> So, will be making these in pairs. Anyone else interested in a pair?
>
> John :-#)#
>
I have had the Z8002 adapter boards made now, and I have two spare pairs 
- and three others which are spoken for. $10USD per PCB pair plus 
postage ($10USD to USA) for TTL members only.

Note this is for a single pair of bare boards, you will need sockets and 
headers...

John :-#)#

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist