[Techtoolslist] For the Fluke Z8000 Pod - making interface PCB for Z8002 CPU

[Justin R]

Hi John,

I’ll take a set please.

Justin
Sent from my iPhone

> On Oct 26, 2018, at 6:28 PM, John Robertson <jrr at flippers.com> wrote:
> 
>> On 2018/09/04 9:00 PM, John Robertson wrote:
>>> On 2018/09/04 8:42 PM, John Robertson wrote:
>>> I have a Z8000 pod and am in the process of making a PCB for the Z8001 test socket on it so I can test Z8002 (Pole Position of course) logic. The PCB is to adapt the Z8002 CPU to the Z8001 test socket.
>>> 
>>> I will likely be making two or three of these (minimum quantity) so if anyone is interested in one for their Z8000 pod please let me know - @ cost plus postage. I plan on having the PCBs run off either later this week or next.
>>> 
>>> John :-#)#
>>> 
>> Right, just remembered that I need two of these, one to load the Z8002 in the Z8001 socket on the Z8000 pod, and a second to take the 48 pin cable's UUT Z8001 plug and convert that to the 40 pin Z8002 socket on the PP board.
>> 
>> So, will be making these in pairs. Anyone else interested in a pair?
>> 
>> John :-#)#
>> 
> I have had the Z8002 adapter boards made now, and I have two spare pairs - and three others which are spoken for. $10USD per PCB pair plus postage ($10USD to USA) for TTL members only.
> 
> Note this is for a single pair of bare boards, you will need sockets and headers...
> 
> John :-#)#
> 
> -- 
> How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/