[Techtoolslist] ADCOM PRO-2 EPROM Emulator

[William Stillwell]

I have to admit, that looks like a cool tool i am a sucker and ordered one
:D , will make it easier then reburning eeproms over and over and over
again for testing stuff...


William Stillwell

Board Member - Inspiration labs, Inc. a 501c3 organization

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization




On Wed, Jul 10, 2019 at 9:50 AM Kurt Mahan <kmahan at xmission.com> wrote:

> I've used the "memSIM2" a couple of times and it worked.  YMMV - my
> usage was in a non-game project (I know...).  I also didn't put a logic
> analyzer on it to see how clean the signals are.  But it was easy to use
> and nothing caught on fire.
>
> https://www.ebay.com/itm/memSIM2-EPROM-Emulator/162310534410
>
> Takes a while to arrive - coming from Poland.
>
> --Kurt
>
> On 7/10/19 7:34 AM, John Robertson wrote:
> > On 2019/07/09 11:41 p.m., Tony Jones wrote:
> >>
> >>
> >> On Tue, Jul 9, 2019, 5:52 PM John Robertson <jrr at flippers.com
> >> <mailto:jrr at flippers.com>> wrote:
> >>
> >>     Any one have information on these tools? I'm looking for replacement
> >>     emulator for my shop
> >>
> >>
> >> I don't have any experience but I'm curious what your use case is for
> >> this tool?  I understand what it is, just not sure how it's useful
> >> for you. I can see how it would be very useful for developing custom
> >> code for a given board but I assumed you were more repair focused.
> >>
> >> Tony
> >>
> > I am modifying code for my soon-to-be released Bally Home pinball MPU
> > (System 1) replacement sub-board and so far have been burning a couple
> > of dozen EPROMs to try and troubleshoot the last annoying bit.... The
> > EPROM emulator would cut my wait time to basically zero and reduce
> > wear and tear on the EPROM socket. It may not arrive in time for this
> > project but I will be doing this again for some other obsolete MPUs
> > (ALI & Rotation 8) in the near future so it is a useful tool for me to
> > have on the shelf.
> >
> > Thanks,
> >
> > John :-#)#
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>