[Techtoolslist] Fluke 900 kit on eBay

[Jess Askey]

I have all those carts already.. there wasn't really much in there that hasnt been archived already, but it certainly was a 'complete' package.

If anyone here got it, I would love to understand what the ground connectors on the interface board are because I just have to push fat resistor wire in them and then use a clip lead.

I don't even own the Interface board that I have.. so if anyone runs across one (doubtful) keep me in mind! Anyone have a friend in Cairo that comes back to the States regularly?
________________________________
From: Techtoolslist <techtoolslist-bounces at flippers.com> on behalf of William Stillwell <ki4swy at gmail.com>
Sent: Friday, July 26, 2019 9:54:18 AM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] Fluke 900 kit on eBay

If i would of know it has the rev3 , i would of bid 1400 :P hahaha... the
"test failed" is the only thing that scared me...  if it said test passed,
i would of dropped more.. i have access to a large 17x17 book scanner, and
would of scanned all the docs, and dumps the carts... but i guess we will
never see any of it as none of use got it.

William Stillwell

Board Member - Inspiration labs, Inc. a 501c3 organization

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization




On Fri, Jul 26, 2019 at 12:49 PM Tony Jones via Techtoolslist <
techtoolslist at flippers.com> wrote:

> On Fri, Jul 26, 2019 at 9:19 AM William Stillwell <ki4swy at gmail.com>
> wrote:
> >
> > I figured it was you Tony...
>
> LOL.  You don't know me very well then :)  I might sell for that but I
> ain't paying it.
>
> I had $577.97 entered and was at the confirm bid button with about 10
> secs to go,  then at 6 secs it jumped to over $600 so I didn't bother
> further.
>
> I figured it would exceed my bid but I'm amazed at $1313.
>
> It did include the IB and the seller confirmed to me that it has rev 3
> of the HSB but the only thing I don't have is the test pcb/psu and the
> training cartridge. I had a slight interest in seeing what's on those
> carts and the associated training manual but I suspect they assume you
> have the test pcb.
>
> tony
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/