[Techtoolslist] 9010 and Konami 1 cpu?

[davids at oz.net]

Maybe, don't want to drop $70 on a part I might not need of course.  But probably worth it to try.  I started working on a simple signal adapter PCB to convert the pinout.  Should let the fluke do the exercise functions but won't run the game of course.

David

-----Original Message-----
From: Techtoolslist <techtoolslist-bounces at flippers.com> On Behalf Of Justin
Sent: Saturday, January 4, 2020 10:11 PM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] 9010 and Konami 1 cpu?

I was looking at that myself with a Juno First boardset that I’m working on.  

Maybe this adapter would do the job?

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F223533089610

Justin
Sent from my mobile

> On Jan 4, 2020, at 8:15 PM, davids at oz.net wrote:
> 
> Working on a Konami jailbreak board.  The Cpu is a Konami-1 which is 
> a 6809E with some built in encryption stuff (and two more pins).
> 
> 
> 
> Anyone ever used a fluke on one of these?  Any idea how to wire up an 
> adapter or if there is one out there?
> 
> 
> 
> Thanks,
> 
> David
> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/