[Techtoolslist] Replacement header for z80 pod

[Bill Karkula]

Going from memory here but I believe you can get away with a standard ribbon cable and 40 pin DIP IDC in a pinch until you can source a replacement.  I seem to recall from many years ago that was what I used on one of my pods until I replaced it.  


Best Regards,

Bill

> On Mar 12, 2020, at 2:41 PM, Tony Jones <tony at tonyjones.com> wrote:
> 
> I have 2 or 3 NOS ones.  I'd have to check.
> 
>> On Thu, Mar 12, 2020 at 12:08 PM Marc Desfossés <mdesfoss at hotmail.com>
>> wrote:
>> 
>> Hi,
>> 
>> Does anyone have a spare cable to replace the header on a 40 pins Z80 pod
>> ? Just got one of ebay and it was damaged during shipping.
>> 
>> Thanks
>> 
>> Marc
>> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/