[Techtoolslist] Fluke 9100A - Cannot boot from system disks

[Marc Desfossés]

Hi Chris,

I am using the Sony type. Do you remember what your HxC setup is using ?

Marc

________________________________
De : Techtoolslist <techtoolslist-bounces at flippers.com> de la part de Chris Loggans via Techtoolslist <techtoolslist at flippers.com>
Envoyé : 17 mars 2020 21:32
À : Technical Tools Mail List <techtoolslist at flippers.com>
Cc : Chris Loggans <cloggans at yahoo.com>
Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks

Mark,
     When you use the service disk, what type of floppy drive is your 9100 set up for?  It’s been a while since I did the HxC floppy conversion on mine but I seem to recall getting strange errors if the wrong floppy model was selected.
Chris


Sent from Yahoo Mail for iPhone


On Tuesday, March 17, 2020, 7:53 PM, Marc Desfossés <mdesfoss at hotmail.com> wrote:


Hi,

I tried the Gotek with hxc firmware and and hfe image files (Thanks Tony !!)

I still get an error on system disk 2. It's a different error this time. I tried both 6.1 and 6.0 images.

Error 205: /dd/rom/level1

Looking at the OS-9 doc, here is what it means
205: ILLEGAL MODULE HEADER - The specified module cannot be loaded because its module sync code is incorrect.

I was able to skip it and this time I was able to boot the system from the disk. Could it be the floppy controller logic that is problematic ?

Marc

________________________________
De : Techtoolslist <techtoolslist-bounces at flippers.com> de la part de Tony Jones <tony at tonyjones.com>
Envoyé : 17 mars 2020 13:13
À : Technical Tools Mail List <techtoolslist at flippers.com>
Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks

On Tue, Mar 17, 2020 at 10:05 AM Tony Jones <tony at tonyjones.com> wrote:

>
> If I were you (since you have the temporary workaround of using the ftp
> HDD image) I'd just install a Gotek and be done with floppies.
>

I should add, that if you go this route you'll need to convert the git repo
to a format suitable for the Gotek.  I batch converted the entire repo to
HFE a while ago,  if anyone wants this,  drop me a line.
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/