[Techtoolslist] part sourcing help - edge connectors, hook leads

Rodger Boots rlboots2 at gmail.com
Mon Mar 23 14:40:47 EDT 2020


Something like a DigiKey EDC307440-ND (which the old Atari games used)?

On Mon, Mar 23, 2020, 12:51 PM Joe Magiera <joemagiera at ameritech.net> wrote:

> Anyone have a good source for edge connectors of various sizes?  I don't
> know what to call what I'm looking for, so it makes it hard to search for.
>
>
>
> Trying to build up my test area environment.  I have a good JAMMA set up,
> but I'd like to expand to test non-JAMMA (and build some of the more common
> PCB adapters to JAMMA).  I'm looking for connectors that on one side is the
> female side, i.e., a flat male side edge connector would plug into it.  On
> the other side of the connector would be two rows of pins.  I looked at a
> couple of ones that I have and while I have the female side, the two rows
> of
> pins aren't the pins I'm looking for.  They just have a pin.  I'd like to
> get pins that are flat and have a small hole in them so I can easily use
> hook leads.  I'd also like to get an assortment of different sizes (number
> of pins).
>
>
>
> I hope this made sense and maybe someone can tell me the correct/proper
> names for these so I can search myself.
>
>
>
> And while I'm at it, anyone have a source for decent priced hook leads?
> The
> one's I've found are ridiculously expensive.  $9.95 (plus shipping & tax)
> for a one foot piece of wire with a cheap hook on each end.  Yikes.  I
> guess
> I'm not very good at searching.
>
>
>
> Thanks,
>
>
> Joe
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>


More information about the Techtoolslist mailing list