[Techtoolslist] Fluke 9105A

[Kevin Moore]

No keyboard with it. Is it not a standard AT keyboard? I have plenty of old
working AT 101 keyboards.

Kevin


On Tue, Mar 2, 2021 at 11:15 AM William Stillwell <ki4swy at gmail.com> wrote:

> Install two Gotek Drives and worry about finding a scsi controller later.
>
> Did you get the keyboard with it ? ( if not i have an east to build USB
> adapter that allows the use of any off the shelf wireless keyboard .. )
>
> I think that's the only personality module i am missing is the 80286 one
>
> William Stillwell
>
>
> Board Member - Inspiration labs, Inc. a 501c3 organization
>
> Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
> Arcade & Pinball Show a 501c3 organization
>
> Member of MakerFX - a 501c3 organization
>
> Former Board Member - West Central Florida Group - a 501c3 Organization.
>
>
> On Tue, Mar 2, 2021 at 11:05 AM Kevin Moore <talon.k at gmail.com> wrote:
>
> > I apologize for the poor pictures. The Power outage and cold snap we had
> in
> > Texas burst pipes and we are in the middle of tearing out flooring and
> > walls.
> >
> > I'm not seeing a model # on the Fluke monitor, so I'm not sure if it even
> > goes with this unit as of yet.
> > Here is the google drive link to the photos.
> >
> >
> >
> https://drive.google.com/drive/folders/1qYFtIBzP96yJ-bvmfYbhSrJhsqtHdahh?usp=sharing
> >
> > The RTC fix isn't a problem, I've done that before, and there is a
> > pre-built battery board for those now.
> >
> > Just need to find the right boot software, and make a disk.
> >
> > I would like to see about getting a HDD controller and upgrading this.
> Just
> > what I need, another project :)
> >
> > Kevin
> >
> >
> >
> > On Tue, Mar 2, 2021 at 8:59 AM B L <bl_bl at hotmail.com> wrote:
> >
> > > I was the one who uploaded the Spectrum TX images a few years back
> when I
> > > bought my first 9110FT unit. I know that Ian Eure tested the software
> > after
> > > that but I'm not sure if he managed to get it working all the way? I
> also
> > > bought a GPIB card at the time and this is something that would be
> > > interesting to test out properly. Like Tony said, if you need the
> manual
> > I
> > > think I have them as well.
> > >
> > >
> > > /Martin!
> > >
> > > ________________________________
> > > From: Techtoolslist <techtoolslist-bounces at flippers.com> on behalf of
> > > William Stillwell <ki4swy at gmail.com>
> > > Sent: Tuesday, March 2, 2021 2:43 PM
> > > To: Technical Tools Mail List <techtoolslist at flippers.com>
> > > Subject: Re: [Techtoolslist] Fluke 9105A
> > >
> > > the 9100 I use has a badly failing display which is very hard to
> read.. I
> > > actually have a large collection of Retro "old" computers , as I set up
> > > retro computer museums at local maker faires and arcade shows. ( 20+
> > > computer systems )
> > >
> > > When i saw it need windows 3.1 and a 386.. i was like " i have one of
> > those
> > > just sitting on the shelf " , i may try a 486 SX machine first.
> > >
> > > William Stillwell
> > >
> > >
> > > Board Member - Inspiration labs, Inc. a 501c3 organization
> > >
> > > Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
> > > Arcade & Pinball Show a 501c3 organization
> > >
> > > Member of MakerFX - a 501c3 organization
> > >
> > > Former Board Member - West Central Florida Group - a 501c3
> Organization.
> > >
> > >
> > > On Tue, Mar 2, 2021 at 9:34 AM Tony Jones <tony at tonyjones.com> wrote:
> > >
> > > > On Mon, Mar 1, 2021, 10:31 PM William Stillwell <ki4swy at gmail.com>
> > > wrote:
> > > >
> > > > >
> > > > > I will have to see if i can find another copy of the manuals, i
> will
> > > have
> > > > > to try to scan them.
> > > > >
> > > >
> > > > I think you'll find the software requires a very old pc to run on,
> ieee
> > > > card timing iirc.
> > > >
> > > > If there was demand I'd scan my manual in but I don't think it's
> useful
> > > > enough to warrant the effort.
> > > >
> > > > I think your better off using a 9110 as a 9100.
> > > >
> > > > >
> > > > _______________________________________________
> > > > Techtoolslist mailing list
> > > > Techtoolslist at flippers.com
> > > > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > > > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > > >
> > > _______________________________________________
> > > Techtoolslist mailing list
> > > Techtoolslist at flippers.com
> > > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > > _______________________________________________
> > > Techtoolslist mailing list
> > > Techtoolslist at flippers.com
> > > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > >
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>