[Techtoolslist] Fluke 9105A

[William Stillwell]

Install two Gotek Drives and worry about finding a scsi controller later.

Did you get the keyboard with it ? ( if not i have an east to build USB
adapter that allows the use of any off the shelf wireless keyboard .. )

I think that's the only personality module i am missing is the 80286 one

William Stillwell


Board Member - Inspiration labs, Inc. a 501c3 organization

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization

Member of MakerFX - a 501c3 organization

Former Board Member - West Central Florida Group - a 501c3 Organization.


On Tue, Mar 2, 2021 at 11:05 AM Kevin Moore <talon.k at gmail.com> wrote:

> I apologize for the poor pictures. The Power outage and cold snap we had in
> Texas burst pipes and we are in the middle of tearing out flooring and
> walls.
>
> I'm not seeing a model # on the Fluke monitor, so I'm not sure if it even
> goes with this unit as of yet.
> Here is the google drive link to the photos.
>
>
> https://drive.google.com/drive/folders/1qYFtIBzP96yJ-bvmfYbhSrJhsqtHdahh?usp=sharing
>
> The RTC fix isn't a problem, I've done that before, and there is a
> pre-built battery board for those now.
>
> Just need to find the right boot software, and make a disk.
>
> I would like to see about getting a HDD controller and upgrading this. Just
> what I need, another project :)
>
> Kevin
>
>
>
> On Tue, Mar 2, 2021 at 8:59 AM B L <bl_bl at hotmail.com> wrote:
>
> > I was the one who uploaded the Spectrum TX images a few years back when I
> > bought my first 9110FT unit. I know that Ian Eure tested the software
> after
> > that but I'm not sure if he managed to get it working all the way? I also
> > bought a GPIB card at the time and this is something that would be
> > interesting to test out properly. Like Tony said, if you need the manual
> I
> > think I have them as well.
> >
> >
> > /Martin!
> >
> > ________________________________
> > From: Techtoolslist <techtoolslist-bounces at flippers.com> on behalf of
> > William Stillwell <ki4swy at gmail.com>
> > Sent: Tuesday, March 2, 2021 2:43 PM
> > To: Technical Tools Mail List <techtoolslist at flippers.com>
> > Subject: Re: [Techtoolslist] Fluke 9105A
> >
> > the 9100 I use has a badly failing display which is very hard to read.. I
> > actually have a large collection of Retro "old" computers , as I set up
> > retro computer museums at local maker faires and arcade shows. ( 20+
> > computer systems )
> >
> > When i saw it need windows 3.1 and a 386.. i was like " i have one of
> those
> > just sitting on the shelf " , i may try a 486 SX machine first.
> >
> > William Stillwell
> >
> >
> > Board Member - Inspiration labs, Inc. a 501c3 organization
> >
> > Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
> > Arcade & Pinball Show a 501c3 organization
> >
> > Member of MakerFX - a 501c3 organization
> >
> > Former Board Member - West Central Florida Group - a 501c3 Organization.
> >
> >
> > On Tue, Mar 2, 2021 at 9:34 AM Tony Jones <tony at tonyjones.com> wrote:
> >
> > > On Mon, Mar 1, 2021, 10:31 PM William Stillwell <ki4swy at gmail.com>
> > wrote:
> > >
> > > >
> > > > I will have to see if i can find another copy of the manuals, i will
> > have
> > > > to try to scan them.
> > > >
> > >
> > > I think you'll find the software requires a very old pc to run on, ieee
> > > card timing iirc.
> > >
> > > If there was demand I'd scan my manual in but I don't think it's useful
> > > enough to warrant the effort.
> > >
> > > I think your better off using a 9110 as a 9100.
> > >
> > > >
> > > _______________________________________________
> > > Techtoolslist mailing list
> > > Techtoolslist at flippers.com
> > > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > >
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>